竹工藝/竹家具
在研究結構時發現建築的耐震結構中靜不定力平衡的概念，發現可動性越高可以承受的重量反而增加，因此便以如何製作自由度最高的編織手法為主，進而發展後續結構。
When researching the structure, I found the concept of static and indeterminate force balance in the earthquake-resistant structure of the building. It was found that the higher the mobility, the more weight it could bear, so the main focus was how to make the weaving technique with the highest degree of freedom, and then the subsequent structure was developed.
發展
Development
在實驗的過程，最初使用紙板做為替代，
而後才開始嘗試用不同寬度厚度的竹片及繩線來做測試。
During the experiments, I used cardboards as substitutes first,
and then I started trying various bamboo strips and cotton threads.
草模
Prototype
經過結構測試後，提出兩版草模。後又因載體不適當而捨棄。
於是決定來個Wow！
After structural testing, two versions of the prototype were proposed.Later, it was discarded due to inappropriate application.
than.. Surprise!
結構
Structure
在結合的方法上採用了壓一挑一的編織手法，
以花結的手法將起頭固定於同處，後續分散重新編織回到壓一挑一，
保留給上下相應的空間確保編織之間的彈性，而後以此結構為單體進行組合。
中間以及底部使用烤彎的竹片，希望藉由竹片的彈性來增加支撐力。
In the method of combining, the weaving technique of pressing one by one is adopted, Fix the beginning at the same place with the technique of a rose knot, and then spread and re-weave it back to pressing one by one.The correspondingspace is reserved for the upper and lower parts to ensure the elasticity betweenthe weaves, and then this structure is combined as a single unit.
Bamboo pieces are used in the middle and at the bottom, hoping to increase the support force by the elasticity of the bamboo pieces.
產品細節
Details
設計師
Designers
施閔軒
Shenny Shih
